Free-cutting cold-drawn steel in bars DIN EN 10087-1999, ISO 683-4:2016
![](/local/templates/main_en/images/gost_logo.png)
DIN EN 10087-1999, ISO 683-4:2016
![](/local/templates/main_en/images/bervel_logo.png)
General specifications
Application
free-cutting steel is intended for uses where easy machining is the primary requirement. The product is used for a wide variety of machined parts.
Accuracy degree
h10, h11, h12
Diameter, mm
22-30
Steel grade
10S20, 9SMnPb28
Surface quality grade
B, C
Length, m
2.5-6.0
Length tolerance
-0.0/+5.0
Cross sectional area
<0.2 mm/1m
Heat treatment
untreated, bright annealed (spheroidize annealing)
Buy wholesale
Coating
- no coating
Packing
Random length from 2.5 to 6 metres, stock weight 1-2 tons; exact length on request. Bars tied up with steel straps
Reference Information
see also
High-strength hexagon nut with large width across flats for steel constructions of bridges. Equivalent to GOST R 53664-2009. Thread diameter: M22-M27. Tension from test load, N / mm2 (kgf / mm2) not less than 1245 (127) . Coating: no coating, hot-dip galvanizing, zinc flake coating.
Our partners
![](/upload/iblock/e73/Velesstroy.png)
![](/upload/iblock/741/VIS.png)
![](/upload/iblock/3a3/Voronezhstalmost.jpg)
![](/upload/iblock/7ae/Gazprom.jpg)
![](/upload/iblock/d7c/KAMAZ.jpeg)
![](/upload/iblock/008/Konakovskiy-zavod-MK.jpg)
![](/upload/iblock/a28/Konar.jpg)
![](/upload/iblock/8eb/KURGANSTALMOST.png)
![](/upload/iblock/da2/MS-_11.jpg)
![](/upload/iblock/547/MTZ.jpg)
![](/upload/iblock/c20/NIPIGAZ.png)
![](/upload/iblock/fc3/Oskolskiy-metallurgicheskiy-kombinat.png)
![](/upload/iblock/161/Prodmash.jpg)
![](/upload/iblock/ef5/SIBUR.png)
![](/upload/iblock/c67/Tochinvest.jpg)
![](/upload/iblock/bed/TRDM.jpg)
![](/upload/iblock/770/UGMK-TSink.jpg)
![](/upload/iblock/c34/UMEKON.jpg)
![](/upload/iblock/3e8/Energoprogress.png)